Strapping machine SFF - semi-automatic machine for steel, PP and PET tape This type of machine is designed to facilitate the taping of larger objects with steel, PP or PET tape with a width of 10 - 20 mm depending on the modification. The machine wraps the tape around three sides of the packed object. A manual electric or pneumatic strapping machine is usually used for strapping. It significantly increases the taping efficiency and safety at work. One operator is sufficient to tape even large items. The dimensions of the banding machine can be adjusted according to the customer's requirements. The operation of the machine is very simple: the operator inserts the tape into the slot of the upper part of the bander and starts the cycle by pressing the button located on the control panel at the front of the machine. The machine shoots the tape around the wrapped object and ejects it at the front near the operator. The operator then pulls the tape from the top of the wrapper and inserts it into the strapping machine together with the free end of the tape. He then performs the strapping.